安科瑞防逆流電表在菲律賓光伏項目的應用

時間：2021-11-07作者：江蘇安科瑞電器制造有限公司瀏覽：136

1.項目背景Background

隨著光伏行業的發展，部分地區村級變壓器及工業用電變壓器容量與光伏項目的裝機容量處于飽和。電網公司要求對后建的光伏并網系統為不可逆流發電系統，指光伏并網系統所發生的電由本地負載消耗，多余的電不允許通過低壓配電變壓器向上級電網逆向送電。

With the development of photovoltaic industry, the capacity of village-level transformers and industrial power transformers and the installed capacity of photovoltaic projects are saturated in some areas.The power grid company requires the photovoltaic grid-connected system to be a non-backflow current generation system, which means that the electricity generated by the photovoltaic grid-connected system is consumed by the local load, and the excess electricity is not allowed to be sent to the upper power grid through the low-voltage distribution transformer in reverse direction.

光伏逆變器在將光伏組件產生的直流電變換成交流電時，會夾雜有直流分量和諧波，三相電流不平衡，輸出功率不確定性等，目前基本沒有采取有效的治理手段，因此，當有發電功率送往公用電網時，就會對電網產生諧波污染，易造成電網電壓波動，閃變等，如果有許多這樣的發電源向電網輸電時，會導致電網電能質量嚴重下降。所以這類光伏發電系統必須配套加裝防逆流設施，來防止逆功率的發生。

Photovoltaic inverter in photovoltaic components will produce direct current into alternating current (ac), has the dc component and harmonic mixing, unbalanced three phase current, output power of uncertainty, such as the current basic didn't take effective management measures, therefore, when there is power to the utility grid, will generate harmonic pollution to power network, easy cause power grid voltage fluctuation and flicker, etc.,If there are many such power sources to transmit electricity to the grid, the power quality of the grid will be seriously degraded.Therefore, this kind of photovoltaic power generation system must be equipped with anti-backflow current facilities to prevent the occurrence of reverse power.

 

當光伏發電量大于負載需求電量時，會產生逆功率。因此，我們需要儀表來判定。逆變器有過功率輸出，再由儀表通過RS485通訊發出信號和逆變器數據交互，調節逆變器輸出功率，使其輸出功率和用電功率平衡。

When the photovoltaic power generation is greater than the load demand, the inverse power will be generated.So we need instruments to determine that Inverter has power output, and then by the instrument through RS485 communication ** and inverter data interaction, adjust the inverter output power, so that its output power and power balance.

 

2.項目概述Project Overview

菲律賓一家做光伏發電的公司，聯系到我司，尋找防逆流電表  ， 對接協議合適后， 采購我司的ACR10R-D16TE.

A photovoltaic power generation company in the Philippines contacted our company to look for anti-backflow current meters. After proper connection agreement, we will purchase ACR10R-D16TE from our company.

 

 3.防逆流檢測儀表Anti-backflow detection meter

 

 

當光伏發電量大于負載需求電量時，會產生逆功率。因此，我們需要儀表來判定逆變器有過功率輸出，再由儀表通過RS485通訊發出信號和逆變器數據交互，調節逆變器輸出功率，使其輸出功率和用電功率平衡。

When the photovoltaic power generation is greater than the load demand, reverse power will be generated. Therefore, we need an meter to determine that the inverter has over-power output, and then the meter sends a ** through RS485 communication to interact with the inverter data to adjust the output power of the inverter to balance the output power and the electrical power.

 

4.功能Function

 

 

 

 

 

5.接線Wiring

 

 

 

 

6.典型鏈接 Typical Connection

 

 

 

參考文獻 Bibliography

1.Solutions for enterprise micro-grid system

 


江蘇安科瑞電器制造有限公司專注于穿孔式電流變送器,電瓶車安全充電站,開關柜綜合測控裝置,水電氣能耗監控分析系統,水電氣智能遠傳集抄監控系統,智能電弧光保護裝置等

• 詞條

  詞條說明

• 安科瑞AMC16Z和AMC100數據中心列頭柜監控模塊

  【摘要】隨著數據中心的迅猛發展，數據中心的能耗問題也越來越**，有關數據中心的能源管理和供配電設計已經成為熱門問題，合理可靠的數據中心配電系統方案，是提高數據中心電能使用效率，降低設備能耗的合理方式。要實現數據中心的節能，首先需要監測每個用電負載，而數據中心負載回路非常的多，傳統的測量儀表無法滿足成本、體積、安裝、施工等多方面的要求，因此需要采用適用于數據中心集中監控要求的多回路監控裝置。安科瑞公

• 開口電流互感器

  一、產品簡介功能：AKH-0.66K系列開口式電流互感器安裝方便，無須拆一次母線，亦可帶電操作，不影響客戶正常用電，可與繼電器保護、測量以及計量裝置配套使用。應用范圍：應用于配電系統改造項目。訂貨范例：具體型號：AKH-0.66/K K-80*50 800技術要求：額定電流比800A/5A；準確級0.5級；額定負荷2.5VA。通訊協議：無輔助電源：**、技術參數AKH-0.66/K開口式電流互感器

• 【開口電流互感器】開口電流互感器有什么缺點

  開口電流互感器適用于額定電壓為10kV及以下戶內裝置。供電路控制、測量、線路改造計量及保護等用。LMKK開口電流互感器?一.概述本電流互感器，產品符合IEC和GB1208-97《電流互感器》?二.結構簡介?本電流互感器采用高強度PVC外殼，全澆注母線式結構?；ジ衅髦苯涌ㄔ陔娎|上三個性橡膠圈抵住電纜與電纜與一體。?互感器鐵芯采用優質硅鋼片卷制，二次導線均勻繞制

• 【能耗分析監測系統】能耗監控系統的主要功能

  全電量測量（U、I、P、Q、PF、F、S）較大需量（I,P），四象限電能計量、復費率電能累計THDu、THDi、2—31次諧波分量電壓波峰系數、電話波形因子、電流K系數、電壓電流不平衡度電網電壓電流正、負、零序分量測量4DI+3DORS485接口、Modbus、DL/T645應用于高壓重要回路低壓進線柜。建筑工程能耗監測系統能耗“應合理設置分項計量回路，以下回路應設置分項計量表計”。變壓器低壓側出