Medical Isolated Power Supply System in Angola

時間：2021-03-23作者：安科瑞電子商務（上海）有限公司瀏覽：60

朱鹍
安科瑞電氣股份有限公司  上海嘉定



Abstract: Diagnosis and treatment in modern hospitals are inseparable from advanced medical equipment, which are inseparable from safe and reliable power supply. Many operations often last for several hours, and the consequences of a sudden power failure during the operation are unimaginable. At the same time, many medical devices directly touch or penetrate into the human organs. At this time, the very small leakage current will threaten the life of the patient. Therefore, the national standards have made clear requirements, medical group 2 locations must be powered by IT system. This article introduces the application of Acrel Medical IT System in Luanda General Hospital, Angola.

 

Keywords: Medical IT system, Insulation monitoring device, Alarm indicators.  

 

1.Project Overview

Luanda General Hospital in Angola is a China-aided reconstruction and expansion project of Luanda General Hospital in Angola undertaken by China Railway Fourth Bureau. The project uses 8 sets of Acrel medical IT system products. They are AITR series isolation transformer, AKH-0.66P26 current transformer, AIM-M series insulation monitoring device, AID series remote alarm indicator and DC power supply unit.

 

2.Introduction of Medical Isolated Power Supply System

The medical isolated power supply system is to switch the grounding system (TN-S system) into ungrounded system (IT system) through a medical isolation transformer to supply power for important medical equipment. The insulation monitoring device has the function of insulation monitoring and fault locator has the function of fault circuit locating.

 

3.Acrel Medical Isolated Power Supply System Solutions

Acrel medical isolated power supply system is suitable for operating room, ICU, CCU and other medical group 2 locations providing safe and uninterruptible power supply. It mainly includes AITR series isolation transformer, AKH-0.66P26 current transformer, AIM-M series insulation monitoring device, AID series remote alarm indicator, DC power supply, ASG series test ** generator and AIL series insulation fault locator.

 

3.1Acrel Medical Isolated Power Supply System for Operating Room

 

Option I  without insulation fault location function

 

 

Option II  with insulation fault location function

Note: 1. For operating room, AID series alarm indicator should be installed on the intelligence panel inside the operating room, or next to the intelligence panel (wall mounted installation) so that medical personnel can immediately receive a notification when there is power supply failure.

          2. In Option II，if the number of located channels is more than eight，two sets of AIL150 can be used. The combination can be AIL150-8 and AIL150-4 (up to 12 channels), or AIL150 -8 and AIL150-8 (up to 16 channels).

 

3.2Acrel Medical Isolated Power Supply System for ICU and CCU  ICU,CCU

 

Option I  without insulation fault location function

 

 

Option II  with insulation fault location function

Note: For intensive care unit , AID series alarm indicator should be installed in the nurses 'station so that medical personnel can monitor the operating status of isolated power supply system.

 

3.3Product Selection

 

4.Connection Diagram

 

5.Installation Photos

 

6.Conclusion

After expansion and reconstruction, Luanda General Hospital has become the largest hospital in Angola. The Acrel medical IT system provides safe and realible power supply for hospitals,  effectively improving the local medical conditions and benefiting the local people.

 

Bibliography

1.IT System Insulation Monitoring Device and Fault Location System of Acrel. 2020

2.IEC 60354-7-710: 2002 Electrical installations of buildings-Part 7-710:Requirements for special installations or locations - Medical locations. 2002

3.IEC 61558-1-15:2011 Safety of transformers, reactors, power supply units and combinations thereof-Part 2-15: particular requirements and tests for isolating transformers for the supply of medical locations. 2011

作者簡介：
朱鹍，女，就職于安科瑞電氣股份有限公司，主要研究方向為企業能源管控


安科瑞電子商務（上海）有限公司專注于變電所運維云平臺,安全用電管理云平臺,環保用電監管云平臺等, 歡迎致電 15000353138

• 詞條

  詞條說明

• 智慧能耗和諧波監測設計

  摘要： 根據數據降低功耗、提高用電效率提供參數依據。關鍵詞：數據；能耗；諧波監測

• 淺談運維合一模式下變電所集中檢修施工現場的安全管理

  淺談運維合一模式下變電所集中檢修施工現場的安全管理朱鹍安科瑞電氣股份有限公司 上海嘉定 201801?【摘要】本文對“運維合一”變電所變電所集中檢修現場的安全管理進行了研究探討，指出了大型集中檢修工作現場存在的安全隱患，并結合實際工作經驗，提出了做好現場安全管理的辦法?！娟P(guān)鍵詞】運維合一；**；變電所運維。?0引言? ? ? ?安全生

• 電氣*限流式保護器在可燃性粉塵危險場所的應用

  朱鹍安科瑞電氣股份有限公司? 上海嘉定摘要：文章闡述了可燃性粉塵的特點及可燃性粉塵環境粉塵爆炸的危害性，結合國家現行的電氣產品規范的要求，通過一個提取車間內部粉塵爆炸危險區域的電氣設計實例，系統闡述了可燃性粉塵危險環境的分區原則、電氣設備選型、線路短路滅弧保護設計、防雷防靜電設計等，提出不斷利用新技術新產品提高可燃性粉塵危險場所的設計水平的要求。關鍵詞：可燃性粉塵；電氣設備；表面溫度；防

• 中建創業大廈項目遠程預付費電能管理系統

  朱鹍安科瑞電氣股份有限公司，上海 嘉定摘要：介紹中建創業大廈項目遠程預付費電能管理系統，采用智能預付費儀表進行遠程分合控制，達到預付費使用功能。系統采用現場就地組網的方式，組網后通過現場總線通訊并遠傳至后臺，通過Acrel-3200型遠程預付費電能管理系統實現配電回路用電的收費和能效管理。關鍵詞：智能電力儀表;預付費電能表；Acrel-3200型；預付費電能管理系統0? 概述?