西門子S7-1500安裝導軌：530mm

時間：2018-07-12

概述

Entry-level CPU in the S7-1500F Controller product range
Can be used for safety functions up to SIL 3 according to IEC 61508 and up to PLe according to ISO 13849
Suitable for standard and fail-safe applications with medium requirements for program scope and processing speed
Used as central controller in production lines with central and distributed I/O
Supports PROFIsafe in centralized and distributed configuration
PROFINET IO IRT interface with 2-port switch
PROFINET IO Controller for operating distributed I/O on PROFINET
PROFINET I-Device for connecting the CPU as an intelligent PROFINET device under a SIMATIC or non-Siemens PROFINET I/O controller
Isochronous mode

Note:
SIMATIC memory card required for operation of the CPU

應用

The CPU 1511-1 PN is the cost-effective entry-level CPU for standard and fail-safe applications with medium requirements for processing speed and speed of response in discrete production technology. With its RAM size, this CPU is also suitable for medium-sized applications. It can be used as a PROFINET IO controller or as distributed intelligence (PROFINET I-Device). The integrated PROFINET IO IRT interface is designed as 2-port switch so that a linear topology can be set up in the system. In addition, the CPU offers comprehensive control functionalities via easy-to-configure blocks as well as the ability to connect drives via standardized PLC-open blocks.

設計

The CPU 1511F-1 PN has:

a powerful processor:
The CPU achieves a command execution time as low as 60 ns per binary command.
extensive RAM:
230 KB for program, 1 MB for data
SIMATIC memory cards as load memory;
permit additional functions such as datalog and archives
Flexible expansion possibilities: single-tier configuration with max. 32 modules (CPU + 31 modules)
Display with functions for the
- Display of overview information such as station name, higher level designation, location designation, etc.
- Display of diagnostic information
- Display of module information
- Display of display settings
- Setting of IP addresses
- Setting of date and time
- Selection of the operating mode
- Resetting of the CPU to factory settings
- Disabling/enabling of the display,
- Enabling of protection levels
- display of safety mode, overall signature and date of the last download with signature change.
PROFINET IO IRT interface for connecting distributed I/O via PROFINET
Supports PROFIsafe in centralized and distributed configuration

功能

Performance
- Faster command processing, depending on the CPU type, language extensions and new data types
- Even shorter response times of the CPUs due to considerably faster backplane bus
- Powerful network connection:
  each CPU is equipped with PROFINET IO IRT (2-port switch) as standard interface.
Integrated technology
- Connection of analog and PROFIdrive-capable drives via standardized blocks (PLCopen)
- Support of speed-controlled and positioning axes as well as external encoders
- Trace functions for all CPU variables, both for diagnostics in real time as well as for sporadic error detection
- Comprehensive control functionalities, e.g. easily configurable blocks for automatic optimization of the control parameters for optimum control quality
Security Integrated
- Password-based know-how protection against unauthorized reading and modification of program blocks
- Copy protection for tying individual blocks to the serial number of the SIMATIC memory card: The block can only run if the configured memory card is inserted into the CPU.
- 4-level authorization concept:
  Communication to the HMI devices can also be restricted.
- Manipulation protection:
  The controller recognizes changed or unauthorized transmissions of the engineering data.
Design and handling
- Display of the overview information:
  e.g. station name, plant identifier, location designation, etc., diagnostic information, module information, display settings.
- Possible operations on the display:
  set addresses, set date and time, select operating mode of CPU, reset CPU to factory settings, disable/enable display, activate protection levels.
Integrated system diagnostics
- System diagnostics information is displayed consistently and in plain text in the display, TIA Portal, HMI devices and web server, even for messages from the drives, and updated even if the CPU is in STOP mode.
- Integrated in the firmware of the CPU, no special configuration is required
SIMATIC memory card (required for operation of the CPU)
- Used as plug-in load memory or for updating the firmware.
- Additionally for storing additional documents or csv files (for recipes and archives)
- Creation of data blocks for storage/reading of data via SFCs of the user program
Datalog (archives) and recipes
- Storage of csv files for recipes and archives on the SIMATIC memory card;
  easy access to plant-relevant operating data using Office tools or via a web server
- Easy access to configuration data of the machine by means of a web browser or SD card reader (two-way data exchange from and to the controller)
Programming of the standard program section
- Programming with STEP 7 V12 SP1
Programming of the fail-safe program section
- Programming of the safety-related program section with the option package "STEP 7 Safety Advanced". STEP 7 Safety Advanced V12 can run under SIMATIC STEP 7 Professional V12 SP1.

詞條
詞條說明
西門子PLC模塊CPU221緊湊型單元
概述 CPU 1516pro-2 PN 適用于基于 S7-1500 CPU 1516-3 PN/DP 的 SIMATIC ET 200pro 適用于對程序范圍和處理速度具有較高要求的應用，通過 PROFINET IO 進行分布式配置。 PROFINET I/O 控制器，用于在 PROFINET 上運行分布式 I/O PROFINET I-Device，用于連接作為智能 PROFINET 設備、帶
西門子S7-200SR40
?相對于**大公司而言，國內PLC廠商具有如下明顯的劣勢：? 品牌劣勢在市場開拓初期，國產PLC的品牌在較長一段時間內不為用戶認可，從而加大了市場開拓難度。應用業績劣勢相對于**著名的PLC廠商而言，國內公司的PLC應用業績較少，用戶對國產PLC的性能、產品質量和技術支持持懷疑態度。產品線劣勢在國內公司開展PLC業務的初幾年，PLC產品線不完善，產品的品種較少，不利于
6ES7 972-0BA11-0XA0
我公司是一家專業銷售，維修西門子工業自動化產品，團隊成立幾十年，憑借高**的技術和專業的服務！一致得到客戶的**！歡迎來電質詢高品質西門子產品！聯系人????????????：瞿章明（銷售工程師）手機??????&nb
西門子紫色地下電纜
我公司是一家專業銷售，維修西門子工業自動化產品，團隊成立十幾年，憑借高**的技術和專業的服務！一致得到客戶的**！歡迎來電質詢高品質西門子產品！歡迎來電質詢高品質西門子自動化產品；聯系人??????????? ：瞿章明（銷售工程師）聯系電話：???&nb