Delivery Release of SIMATIC WinCC/SES V7.5

時間：2020-09-01

WinCC/SES supplements SIMATIC WinCC V7.5 with the functions of the Sequence Execution System

Product description

General:

WinCC/SES V7.5 (Sequence Execution System) is the option package of WinCC for sequential control of recipe-based and sequence-based processes.

WinCC/SES is especially suitable for production plants in which dosing, mixing and material transport are important process actions.

WinCC/SES supplements SIMATIC WinCC V7.5 with these functions

WinCC/SES offers easy changing of production parameters and production processes in Runtime without changing the PLC code.

Clear visualization of the production steps with the latest states.

Option for targeted intervention in the running process with manual jumps to a specific step or with automatic jumps as soon as a configured event occurs

Clearly structured comparison of actual values with setpoints for each individual step

Single-step mode in which the operator can switch to the next step independently.

WinCC/SES is especially suitable for production plants in which dosing, mixing and material transport are important process actions.

SIMATIC WinCC/SES V7.5 offers convenient configuration in the Configuration Studio

You can now keep multiple SES controls open at the same time.

SES V7.5 now gives you the option to define up to 200 steps in a sequence.

Control of up to 160 control elements per unit.

Up to 1000 parameters per sequence are now supported

SES V7.5 now supports up to 150 units.

Simultaneous saving of up to 5 sequences per unit in the PLC.

Exception handling (special sequences) is supported, which can be activated as soon as the Running state is changed to Holding, Resuming, Aborting, etc.

Compatibility

Note that SIMATIC WinCC/SES requires SIMATIC WinCC V7.5 as a basis.

WinCC/SES supplements SIMATIC WinCC V7.5 with the functions mentioned above.

In regard to configuration, WinCC/SES V7.5 has been released for the WinCC V7.5 operating system platforms

WinCC/SES WinCC/SES supports the following project types:

Configuration and Runtime are supported in the single-user system.

Configuration and Runtime are supported as follows in the multi-user system:

Project type	Configuration	Runtime
Server	Yes	Yes
Client without project	No	Yes
Client with project	No	Yes
Engineering System	Yes	Yes
Redundant server	No	No
Web Client	No	No

This is a limited release; for each order of the product the release of the Product Manager is requested by the planner.

Scope of delivery and ordering information

The licensing of the WinCC/SES option is based on the number of units that are controlled with WinCC/SES.

Two licenses are offered for WinCC/SES V7.5 which must be available on the server.

a) One basic license for up to two units
b) An extension license (countable) with which the basic license can be extended by five units each

Machine-readable product code	Article number
WinCC/SES V7.5 Sequence Execution System Basic Package (incl. 2 Units)	6AV6372-2DJ07-5AA0
WinCC/SES V7.5 Sequence Execution System Extension 5 Units	6AV6372-2BJ07-5BA0
WinCC/SES V7.5 Sequence Execution System Basic Package Upgrade V7.3 -> V7.5	6AV6372-2DJ17-5AA0
WinCC/SES V7.5 Sequence Execution System Basic Package Upgrade V7.4 -> V7.5	6AV6372-2DJ17-5AA1
WinCC/SES V7.5 Sequence Execution System Extension 5 Units Upgrade V7.3 -> V7.5	6AV6372-2BJ17-5BA0
WinCC/SES V7.5 Sequence Execution System Extension 5 Units Upgrade V7.4 -> V7.5

13681875601

詞條
詞條說明
加載并保存 SFTP
SFTP通過 SFTP 服務器加載和保存數據SFTP（SSH 文件傳輸協議）傳輸加密文件。在此頁面中組態 SFTP 服務器的訪問數據。還可以將設備數據存儲在客戶端 PC 上的外部文件中，或?qū)⒋藬?shù)據從 PC 的外部文件加載到設備中。這意味著，您也可以通過位于 Admin PC 上的文件加載新固件等。在此頁面上，還可以加載建立安全 * 連接所需的證書。固件固件已簽名且加密。這可確保只能將 Siem
打開和關閉庫視圖
打開和關閉庫視圖在某些情況下，庫視圖將自動打開，例如在編輯某種類型的測試實例或在編輯面板和 HMI 用戶數據類型時。也可以手動打開庫視圖。打開庫視圖要手動打開庫視圖，請按以下步驟操作：打開“庫”(Libraries) 任務卡。在“庫”(Libraries) 任務卡中，單擊“打開/關閉庫視圖”(Open/close library view) 按鈕。將打開庫樹。并關閉“庫”(Library) 任務卡
在安全模塊上激活 Web 服務器
在安全模塊上激活 Web 服務器模塊特定的功能該功能僅適用于 CP 343-1 Advanced/CP 443-1 Advanced 和 CP 443-1 OPC UA，請參見：“S7-300/S7-400/PC CP 的安全性”部分中的“在安全模塊上激活 Web 服務器”部分。
3964(R) 發送數據
使用 3964(R) 發送數據發送時的數據傳輸過程下圖說明了使用 3964(R) 程序發送數據時的傳輸順序。圖片: 使用 3964(R) 程序發送時的數據通信建立發送連接要建立連接，3964(R) 程序?qū)l(fā)送控制代碼 STX。如果通信伙伴在確認延時時間結束前以 DLE 代碼進行響應，則程序?qū)⑶袚Q至發送模式。如果通信伙伴以 NAK 或任何其它控制代碼（DLE 或 STX 除外）進行應答，或在確認延