Configuring the digital inputs and digital inputs/outputs (X122/X132)

時間：2021-07-28作者：上海騰希電氣技術有限公司瀏覽：116

Configuring the digital inputs and digital inputs/outputs (X122/X132)



The digital inputs and digital inputs/outputs (X122/X132) are mainly assigned to SINAMICS Integrated. Through configuration (frames 39x), you can, however, also use the digital inputs and digital inputs/outputs (X122/X132) for the CPU. The following applies:

A digital output is always only available exclusively to SINAMICS Integrated or to the CPU.

If you use a digital input for the CPU, you can also interconnect the digital input at the drive end.

You can configure the digital inputs and digital inputs/outputs (X122/X132) channel by channel. To do so, go to the function view in the project tree under "Automatic speed control" > "Parameter assignment" and set the configuration under "Inputs/outputs".

Bidirectional inputs/outputs are configured in the following configuration mask.


圖片: Bidirectional inputs/outputs

You can assign the SINAMICS digital inputs and digital inputs/outputs (X122/X132) using frame 39x of the PU. The status information of the digital inputs and digital outputs is then transferred at the PROFIdrive PZD sampling rate (p2048). The inputs/outputs are also sampled in the configured sampling time for the digital inputs and digital inputs/outputs (p0799). The application of the output values and return of the input values are therefore subject to dead times and jitter.


圖片: Configuration of frame 393 for automatic speed control

You can find further information on the various different frame types in .

提示 Interface X142 If you have particularly strict requirements for the digital input/outputs, use the digital input/outputs at interface X142. The digital inputs/outputs can be operated in isochronous mode and allow very short response times.


上海騰希電氣技術有限公司專注于西門子PLC,V90伺服,V20變頻器等, 歡迎致電 13681875601

• 詞條

  詞條說明

• Data point typicals 重現參數

  重現參數典型參數說明在以下說明中，除了要處理的數據點編號，相同的數據點典型值將一起介紹。在數據點典型值表中提供了各個參數的以下信息：參數參數名稱聲明參數類型-?INPUT輸入?yún)?shù)-?OUTPUT輸出參數-?IN_OUT輸入/輸出參數數據類型該參數支持的數據類型取值范圍默認值參數的預設值如果未組態數據點典型值的各個參數，則會使用默認值。說明參數的功能說明以及典型值特定的

• SMART通過軟件固件較新

  CPU 通過 RS485 接口從軟件操作進行固件較新S7-200 SMART 編程軟件，從 V2.3 開始具有固件較新的功能。S7-200 SMART V2.3 CPU 系列包含十二種 CPU 型號，分為兩條產品線：緊湊型產品線和標準型產品線。緊湊型 CPU 四種: CPU CR20s、CPU CR30s、CPU CR40s 和 CPU CR60s ,V2.3 版本不適用于 CR40 和 CR 6

• TIA程序，也可生成自己的思維導圖！

  TIA程序，也可生成自己的思維導圖！?2024-07-25TIA 博途從2009年發布V10.5 Basic這個版本以來，到現在已經經過了十幾個版本的迭代。除了的編程組態功能以外，在近幾個版本的新中，博途平臺也推出了一些TIA新工具，不斷豐富著各種場景的應用，進一步提升了自動化的工程效率。SIMATIC Project Insight (項目分析器)?是一款智能工程數據分析工具

• “另存為新條目”對話框中的“常規”選項卡 - （全局庫）

  “另存為新條目”對話框中的“常規”選項卡 - （全局庫）在“另存為新條目”(Save as new item) 對話框的“常規”(General) 選項卡中，可定義將保存在 Teamcenter 中的全局庫屬性。