Overview of isochronous mode

時間：2021-07-28作者：上海騰希電氣技術有限公司瀏覽：131

Overview of isochronous mode



Introduction

The SIMATIC Drive Controller supports isochronous mode for the following clock systems:

PROFINET IO interface X150

PROFIBUS DP interface X126

Technology I/Os X142

SINAMICS Integrated with PROFIdrive Integrated (always isochronous)

You can operate the clock systems separately or coupled on an isochronous basis.

Exception: Isochronous coupling of the PROFIBUS DP interface is not possible.

Independent isochronous mode

If you want to operate the clock systems separately in isochronous mode, configure a cycle time for each clock system and assign the clock systems to different process images, for example:

SINAMICS Integrated → PIP OB Servo [OB 91]

PROFIBUS DP interface X126 → PIP 1 of isochronous mode interrupt OB [OB 6x]

The clock systems are in this case not isochronous to each other.

提示 You cannot operate the X142 technology I/Os in isochronous mode separately from SINAMICS Integrated. If you want to operate technology I/Os X142 and SINAMICS Integrated in isochronous mode simultaneously, always set coupled isochronous mode.




Coupled isochronous mode

In coupled isochronous mode, the relevant clock systems use a shared system clock.

The leading clock system provides its own system clock to the other clock systems.

The following table shows the possible combinations for coupled isochronous mode on the SIMATIC Drive Controller. The leading clock system for each combination is indicated.

列表: Possible combinations for coupled isochronous mode

PROFINET IO interface X150	Technology I/Os X142 (local send clock)	SINAMICS Integrated (PROFIdrive Integrated)	PROFIBUS DP interface X126
X (leading)	X	X	-
X (leading)	-	X	-
X (leading)	X	-1	-
-	X (leading)	X	-

¹ SINAMICS Integrated is not configured.




You configure coupled isochronous mode in STEP 7; see Setting the clock system.

提示 Isochronous coupling of the PROFIBUS interface with other clock systems is not possible. If you want to expand the drive configuration limits with distributed drive systems, connect those distributed drive systems over the PROFINET IO interface X150. Only the PROFINET IO interface X150 can be connected isochronously alongside the MC Servo to the clock system of SINAMICS Integrated and the X142 technology I/Os.


上海騰希電氣技術有限公司專注于西門子PLC,V90伺服,V20變頻器等, 歡迎致電 13681875601

• 詞條

  詞條說明

• 冗余 生成樹

  生成樹提示只有與設備存在在線連接時才顯示該頁面。該頁面顯示有關生成樹和根網橋設置的較新信息。顯示值說明生成樹模式 (Spanning Tree Mode)顯示設置的模式。在“* 2 層 > 生成樹 > 常規”(Layer 2 > Spanning Tree > General) 中*模式?？梢允褂靡韵轮担??'-'-?STP-?RSTP-&n

• 移植組織塊

  移植組織塊組織塊以下規則適用于移植組織塊：在傳送過程中，塊名稱和編號都保持不變。塊接口也保持不變。OB 將分配給對應此 OB 類型的事件。同時，諸如**級之類的 OB 參數也將保持不變。如果在新 CPU 中分配了其它參數，則將為這些參數*默認值。S7-1500 中對某些組織塊 (OB) 不支持，因此無法移植。下表簡要列出這些組織塊以及有關如何在程序中重現功能的相關信息。無法移植的 OB備注OB6

• 組態代理 ARP

  組態代理 ARP模塊特定的功能該功能只適用于 SCALANCE S V3 模塊或較高版本，請參見組態代理 ARP部分

• 編譯項目數據的常規信息

  編譯項目數據的常規信息編譯項目數據編譯期間會轉換項目數據，便于設備讀取。硬件配置數據和程序數據可分別編譯或一起編譯?？梢酝瑫r(shí)編譯一個或多個目標系統的項目數據。以下項目數據必須在裝載前編譯：硬件項目數據。例如，設備或網絡和連接的組態數據軟件項目數據。例如，程序塊或過程畫面提示在編譯設備的過程中，不能啟動其它的編譯過程。對此，請注意，除手動編譯之外，也可對操作員監控設備觸發自動編譯過程。編譯的范圍編譯