Configuring technology I/Os (X142) as isochronous

時間：2021-07-28作者：上海騰希電氣技術有限公司瀏覽：87

Configuring technology I/Os (X142) as isochronous



Requirements

STEP 7, V16 or higher

SIMATIC Drive Controller has been configured.

At least one axis technology object has been created at the CPU of the SIMATIC Drive Controller.
See for example Configuring drives with SINAMICS Integrated isochronously.

Procedure

Open the device view of the CPU.

Configure the operating modes of the technology I/Os in the CPU properties under "General" > "DI/DQ 8x24VDC[X142]" > "Channel parameters", for example, a timer DQ for later use as a cam output for channel 0.


圖片: Setting the operating mode for technology I/O X142

In the project tree under the axis technology object, add an output cam technology object under "Output cam" > "Add new output cam".

Open the configuration of the output cam.

Under "Hardware interface", select the "Activate output" checkbox and the option "Output over Timer DQ".

Assign the configured output under "Output".


圖片: Assigning a channel to the output cam

Use the "Device configuration" button to switch back to the CPU settings and check the settings under "DI/DQ 8x24VDC [X142]" > "I/O addresses".

The following settings must be configured for the input and output addresses:

- "Isochronous mode" is enabled.

- The organization block "MC Servo" is selected.

- The process image "OB Servo PIP" is selected.

Automatic settings

Isochronous mode is mandatory for certain operating modes of the X142 technology I/O channels.

As soon as you set one of the following operating modes for a technology I/O channel, STEP 7 automatically selects the option "isochronous mode".

Timer DI

Timer DQ

Oversampling DI

Oversampling DQ

Event/period measurement

If you assign an output cam, cam track or measuring input technology object to an X142 I/O, STEP 7 automatically sets the process image "OB Servo PIP".

In all other cases, you set the process image manually. If isochronous mode is mandatory for at least one technology I/O, you must set the process image of the "MC Servo" OB (OB91) or an isochronous mode interrupt OB (OB6x).

Setting the clock system

You have configured the technology I/Os as isochronous. Next, set the clock system.

Make the following settings in accordance with whether you are operating the X142 technology I/Os in independent or coupled isochronous mode:

For independent isochronous mode or if the X142 technology I/Os are the leading clock system

- Set the required cycle time.

- Assign the "MC Servo" OB the clock system of the technology I/Os.

提示 You cannot operate the X142 technology I/Os in isochronous mode separately from SINAMICS Integrated. If you want to operate X142 technology I/Os and SINAMICS Integrated in isochronous mode simultaneously, always set coupled isochronous mode.




For coupled isochronous mode:

- Assign the leading clock system to the clock system of the technology I/Os.
You can find details of how to assign the leading clock system in Setting the clock system.


上海騰希電氣技術有限公司專注于西門子PLC,V90伺服,V20變頻器等, 歡迎致電 13681875601

• 詞條

  詞條說明

• DNP3 尋址

  尋址要組態和調試通信模塊，需要以下信息：通信模塊的地址信息對于尋址，必須針對模塊組態以下參數：站地址（數據鏈路層上的 DNP 地址）地址，取決于網絡類型：-?IP 地址與子網掩碼；或者：DHCP 服務器的 IP 地址。-?電話號碼（針對撥號網絡）-?WAN 地址（針對**線路）站自身監聽端口號（針對來自主站的連接請求）主站的地址信息模塊的組態需要以下主站信息：站地址（

• 模塊內部共享輸入/共享輸出 (MSI/MSO)

  模塊內部共享輸入/共享輸出 (MSI/MSO)簡介本部分描述了 S7-1500 I/O 模塊的模塊內部共享輸入/共享輸出 (MSI/MSO) 功能，這些模塊在 ET?200MP 中的 PROFINET 上運行。模塊內部共享輸入/共享輸出功能通過模塊內部共享輸入 (MSI) 功能，輸入模塊可將其輸入數據較多提供給 4 個 IO 控制器。 每個控制器都具有對相同通道的讀訪問權。通過模塊內部共

• 創建新連接 - 概述

  創建新連接 - 概述創建連接 - 備選項有以下選項可用于在網絡視圖中創建連接：圖形連接 組態將連接線拖動到連接伙伴，或者將新連接分配到之前選擇的連接伙伴。這是在網絡視圖中創建單個連接的一種簡便方式。自動或交互式完成缺少的網絡連接。交互連接組態從列表中選擇所需的連接伙伴。當要組態的連接很多時，這種方法比圖形方法較適用。可在以下章節中找到此操作的各個步驟。分配連接路徑根據應用情況，應區分以下步驟：在源

• S7連接組態概述

  連接組態概述簡介在程序編輯器的巡視窗口中分配 PUT 和 GET 指令的連接參數。 所有參數均保存在相應的背景數據塊中。連接組態的結構連接組態由以下部分組成：①用于 PUT 和 GET 的通信指令②調用在線和診斷功能③“屬性”(Properties) 選項卡中的“組態”(Configuration) 選項卡④“組態”(Configuration) 選項卡的區域?qū)Ш舰葸B接參數的常規屬性顯示在線和診斷