6ES7513-1FL02-0AB0

時間：2022-11-03

The CPU for standard and fail-safe applications with medium/high requirements for program/data storage in the S7-1500 Controller product range

Can be used for safety functions up to SIL 3 according to IEC 61508 and up to PLe according to ISO 13849

High processing speed for binary and floating-point arithmetic

Used as central PLC in production lines with central and distributed I/O

Supports PROFIsafe in centralized and distributed configuration

PROFINET IO IRT interface with 2-port switch

PROFINET IO controller for operating distributed I/O on PROFINET

PROFINET I-Device for connecting the CPU as an intelligent PROFINET device under a SIMATIC or non-Siemens PROFINET IO controller

Isochronous mode

Note:
SIMATIC Memory Card required for operation of the CPU

應用

The CPU 1513F-1 PN is the CPU with a medium to large program and data memory for standard and fail-safe applications that also contain distributed automation structures alongside central I/O. It can be used as a PROFINET IO controller or as distributed intelligence (PROFINET I-Device). The integrated PROFINET IO IRT interface is designed as a 2-port switch, enabling a linear topology to be set up in the system. In addition, the CPU offers comprehensive control functionalities as well as the ability to connect drives via standardized PLCopen blocks.

設計

The CPU 1513F-1 PN has:

A powerful processor:
The CPU achieves a command execution time as low as 40 ns per binary command.

Extensive work memory:
450 KB for program, 1.5 MB for data

SIMATIC Memory Cards as load memory;
permit additional functions such as Datalog and Archive Flexible

Expansion capability:
single-tier configuration with max. 32 modules (CPU + 31 modules)

Display with functions for

Display of overview information such as station name, higher level designation, location designation, etc.

Showing diagnostic information

Showing module information

Showing display settings

Setting IP addresses

Setting date and time

Switching the operating mode

Resetting the CPU to factory settings

Disabling/enabling the display

Enabling of protection levels

Display of safety mode, overall signature and date of the last download with signature change

PROFINET IO IRT interface for connecting distributed I/O via PROFINET

Supports PROFIsafe in centralized and distributed configuration

功能

Performance

Faster command processing, depending on the CPU type, lange extensions and new data types

Even shorter response times of the CPUs due to considerably faster backplane bus

Powerful network connection:
Each CPU is equipped with PROFINET IO IRT (2-port switch) as standard interface.

Integrated technology

Connection of analog and PROFIdrive-capable drives via standardized blocks (PLCopen)

Support of speed-controlled and positioning axes as well as external encoders

Trace functions for all CPU tags, both for diagnostics in real time and for sporadic error detection

Comprehensive control functionalities, e.g. easily configurable blocks for automatic optimization of the control parameters for optimum control quality

Security Integrated

Password-based know-how protection against unauthorized read-out and modification of program blocks

Copy protection for tying individual blocks to the serial number of the SIMATIC Memory Card: The block can only run if the configured memory card is inserted in the CPU.

4-level authorization concept:
Communication to operator panels can also be restricted.

Manipulation protection:
The controller recognizes changed or unauthorized transmissions of the engineering data.

Design and handling

Display of overview information:
E.g. Station name, plant designation, location identifier, etc., diagnostic information, module information, display settings.

Possible operations on the display:
Set addresses, set date and time, select operating mode of CPU, reset CPU to factory settings, disable/enable display, activate protection levels.

Integrated system diagnostics

System diagnostics information is displayed consistently and in plain text in the display, TIA Portal, operator panels and web server, even for messages from the drives, and updated even if the CPU is in STOP mode.

Integrated in the firmware of the CPU, no special configuration is required

SIMATIC Memory Card (required for operation of the CPU)

Used as plug-in load memory or for updating the firmware.

Also for storing additional documents or csv files (for recipes and archives)

Creation of data blocks for storage/reading of data via SFCs of the user program

Datalog (archives) and recipes

Storage of csv files for recipes and archives on the SIMATIC Memory Card;
easy access to plant-relevant operating data using Office tools and via web server

Easy access to configuration data of the machine by means of a web browser or SD card reader (two-way data exchange from and to the PLC)

Programming of the standard program section

Programming as of STEP 7 V12 SP1

Programming of the fail-safe program section

Programming of the safety-related program section with the "STEP 7 Safety Advanced" option package. STEP 7 Safety Advanced V12 can run under SIMATIC STEP 7 Professional V12 SP1.

13681875601

詞條
詞條說明
報警顯示的概述
報警顯示的概述“報警顯示”(Alarm display) 功能可用于輸出診斷事件的異步報警、用戶自定義的診斷報警以及 ALARM 指令的報警。發生診斷事件溢出時，將顯示一條提示信息。溢出消除后，將發送 NOTIFY_AP 和 ALARM_AP 類型的報警信號。僅溢出后仍在運行的診斷事件才發送信號。溢出過程中發生的其它診斷事件以及再次離去的診斷事件都不會發送信號（無報警歷史信息）。您還可以從報警顯示
精智屏和S7-400H通信
西門子新推出了新一代的Comfort Panel（精智系列面板）和帶有PROFINET 接口的S7-400H PN(CPU 41x-5H)，在Comfort Panel和S7-400H PN之間建立以太網連接的配置過程中，較之傳統操作面板和S7-400H，組態軟件和方式都產生了變化。注意：本文只描述S7-400H PN通過集成PN接口連接Comfort Panel，S7-400H PN通過集成MP
靜態路由 (IPv6)
靜態路由 (IPv6)在此頁面中組態靜態 IPv6 路由。顯示框說明該頁面包含以下內容：目標網絡 (Destination Network)輸入可通過此路由訪問的目標的網絡地址。前綴長度 (Prefix Length)輸入屬于前綴的左側位數網關 (Gateway)輸入可用來訪問此網絡地址的網關的 IPv6 地址。度量 (Metric)輸入路由的度量。度量對應于基于速度或成本等參數的連接質量。如果存
創建移植文件
創建移植文件以下部分描述了如何使用移植工具將初始項目轉換為可供 TIA Portal 讀取的移植文件。轉換后，將該文件傳送到目標系統在該目標系統處進行移植?？梢?移植文件是包含整個項目（包括完整的硬件配置和相關的軟件）還是僅移植軟件。要求為在初始項目中所使用的所有組態安裝了帶有有效許可的相應原始軟件。初始項目中不具有訪問保護。初始項目必須一致，否則無法保證無故障移植。步驟要創建移植文件，請按以下