澳大利亞較新紐扣電池認證要求

時間：2021-07-27作者：深圳市華商技術有限公司瀏覽：15

澳大利亞強制性安全和信息標準草案規定了包含紐扣和幣形電池以及紐扣和幣形電池本身的消費品的要求。




包含紐扣電池和幣形電池的消費品安全標準規定了使用/包含紐扣/幣形電池的消費品的要求，其設計應避免兒童接觸紐扣/幣形電池，包括電池應牢固，在正常和可預見的使用和濫用條件下不會釋放電池。

紐扣電池和幣形電池的安全標準規定了紐扣電池和幣形電池的兒童防護包裝要求。

含有紐扣電池和幣形電池的消費品信息標準規定了未包裝產品的包裝、說明和零售點的警告和信息要求。

紐扣電池和幣形電池的信息標準規定了紐扣電池和幣形電池包裝上的警告和信息要求以及某些幣形電池的標記要求。







The draft Australian mandatory safety and information standards specify requirements for consumer goods containing button and coin cell batteries and button and coin cell batteries themselves.




The safety standard for consumer goods containing button and coin cell batteries specifies requirements for consumer goods that use/contain button/coin cell batteries to be designed to eliminate child accessibility to the button/coin cell batteries, including that the batteries shall be secure and not release the batteries during normal and foreseeable use and abuse conditions.

The safety standard for button and coin cell batteries specifies requirements for child-resistant packaging of button and coin cell batteries.

The information standard for consumers goods containing button and coin cell batteries specifies requirements for warnings and information on packaging, instructions and at the retail point of sale for unpackaged products.

The information standard for button and coin cell batteries specifies requirements for warnings and information on the packaging of button and coin cell batteries and for markings on certain coin cell batteries.




Relevant documents:




The draft Australian mandatory safety standard for consumer goods containing button and coin cell batteries permits suppliers to comply with one of the following industry standards (or sets of industry standards) deemed to have acceptable button/coin cell battery security and compliance testing requirements.




IEC 62368-1: 2018 Audio/video, information and communication technology equipment – Part 1: Safety requirements

AS/NZS 62368.1:2018 Audio/video, information and communication technology equipment – Part 1: Safety requirements

AS/NZS 60065:2018 Audio, video and similar electronic apparatus-Safety requirements

IEC 62115:2017 Electric toys – Safety – clause 13.4.1, 13.4.2, 13.4.6 and ISO 8124-1:2018 Safety of toys – Part 1: Safety aspects related to mechanical and physical properties

AS/NZS 62115:2018 Electric toys – Safety – clause 13.4.1, 13.4.2, 13.4.6 and AS/NZS 8124.1:2019 Safety of toys – Part 1: Safety aspects related to mechanical and physical properties

AS/NZS 60598.1:2017 Luminaries Part 1: General requirements and tests

UL 4200A UL Standard for Safety for Products Incorporating Button or Coin Cell Batteries of Lithium Technologies

The draft Australian mandatory safety standard for button and coin cell batteries permits suppliers to comply with one of the following industry standards to demonstrate that the child-resistant packaging requirements have been met.

IEC 60086-4:2019 Primary Batteries Part 4: Safety of lithium batteries

AS 5808-2009 Child-resistant packaging - Requirements and testing procedures for non-reclosable packages for non-pharmaceutical products

EN 862:2016 Packaging - Child resistant packing - Requirements and testing procedures for non-reclosable packages for non-pharmaceutical products

ISO 28862:2018 Packaging - Child-resistant packaging - Requirements and testing procedures for non-reclosable packages for non-pharmaceutical products

AS 1928-2007 Child-resistant packaging - Requirements and testing procedures for reclosable packages

ISO 8317-2015 Child-resistant packaging - Requirements and testing procedures for reclosable packages

USA: 16 CFR §1700 Poison Prevention Packaging Standard

The mandatory safety standard for button and coin cell batteries applies child-resistant packaging requirements that deviate from IEC 60086-4 by requiring child-resistant packaging to:

button and coin cell batteries of lithium chemistry of all sizes

button batteries of a chemistry other than lithium with a diameter of 16mm or above.

The mandatory information standard for consumer goods containing button and coin cell batteries applies warning requirements that deviate from certain industry standards that specify button/coin cell battery related warning requirements by requiring that the front panel of the packaging of the consumer goods be marked with an internationally recognised safety alert symbol.




Proposed date of adoption: The mandatory safety and information standards are subject to Australian Government consideration and approval.

Proposed date of entry into force: The proposed requirements will be mandatory 18 months after the mandatory safety and information standards commence.




深圳市華商技術有限公司專注于UL認證,SRRC認證,FCC認證等

• 詞條

  詞條說明

• IEC62612標準是什么？測試內容有哪些？

  IEC/PAS 62612:2009是IEC于2009年6月10日發布的有關普通照明用自鎮流LED燈的性能規范，它是IEC 62560（即普通照明用自鎮流燈安全要求）的補充。PAS全稱為可公開提供的規范，它是“為滿足市場急需而出版的標準文件”，是制定正式**標準之前出版的中間性標準文件。IEC/PAS 62612適用于額定瓦數不**過60 W、額定電壓不**過250 V交流或直流，并且燈頭符合IEC

• 汽車3C認證_新法規CNCA-C11-01

  整車3C認證新法規實施：? ? ? 為了進一步完善CCC認證體系，簡化申請要求，優化實施流程，提高機動車CCC認證 實施的便利性，2020年4月16日發布了《強制性產品認證實施規則 汽車》（CNCA-C11-01：2020，以下簡稱2020版實施規則）。?CNCA-C11-01：2020取代了舊版的實施法規（編號CNCA-C11-01：2014），CNCA-

• E**5032有哪些測試步驟？

  多媒體設備做E**5032有哪些測試步驟？?jī)|博小編來告訴你。不久前歐盟發布EMC指令較新的協調標準清單，多媒體設備的**要求將需符合新的標準EN 55032:2012和EN 55032:2012/AC:2013，以替代原先多媒體類設備適用的EN 55013:2013、EN 55022:2010、EN 55103-1:2009及其修訂件，被替代標準的推斷符合性日期為2017年3月5日，即依照舊版

• IP防塵防水等級 IP54 IP68

  IP是Ingress Protection的縮寫，IP等級是針對電氣設備外殼對異物侵入的防護等級，來源是**電工**的標準IEC 60529，這個標準在2004年也被采用為美國國家標準。在這個標準中，針對電氣設備外殼對異物的防護，IP等級的格式為IPXX，其中XX為兩個阿拉伯?dāng)?shù)字，**標記數字表示接觸保護和外來物保護等級，*二標記數字表示防水保護等級，具體的防護等級可以參考下面的表格。以下是測試